When the network registration is successful,
LED2
is lighting continously by
green
.
LED1
LED2
LED3
Data traffic from the
WAN
interface (mobile network) is indicated by a fast
green
flashing of
LED2
.
You may need to enter your Mobile country code and Mobile network code for roaming settings, or
when using a country network, or if you only want to use a preferred network.
You can find the international country code at
For information on international network settings, contact your mobile service provider.
You can find more network settings on the
Advanced Settings
tab if you want to set more.
4.3 Ethernet (LAN) settings
For the LAN interface, at the
LAN
menu item at the
General Setup
tab
you can define an own IP
range (
IPv4 address
), with the related
IPv4 netmask
(subnet mask).
The detailed
LAN
interface settings can be performed by the
Network Interfaces
menu item at
the
LAN
interface
button.
We recommend that you change the router's
default
192.168.127.1
address
(IPv4 address) to a
custom IP address, depending on your subnet - or the way you want it to be served by the router
device.
Also check the
IPv4 netmask
field to make sure it is appropriate for the class you want to use.
Attention! The IPv6 service cannot be used, so do not enable or configure the fields that apply to
it.
