Below, in the
Tunnel settings
section, the
button can be used to enter the settings for the
tunnel by entering a logic name again
. Local Subnet
and
Remote Subnet
indicate the IP address
range of the local and remote subnets.
The name of the
IKEv1 Phase
2
option is an optional name where you must specify the
Key
exchange
method.
Below, in the
Connection
name section, you can enable or disable the connection (
Enable
/
Disable
connection).
Attention! The IPSEC used by the program uses Strongswan-based IPSec. To learn more about it,
visit the OpenWrt page for more information on possible settings:
https://openwrt.org/docs/guide-user/services/vpn/ipsec/strongswan/start
Enter
the IP setting
for VPN connection’s
remote gateway address
, select
Authentication
mode
, and enter the PSK (
Secret or PSK of connection
) key.
IKEv1 connection
mode
can be main or aggressive.
Enter the keys for the
Local gateway identifier
and the
Remote gateway identifier
.
When you have modified the settings, save them by the
Save & Apply
button.
