- 19 -
Pause stage program
Move the cursor to corresponding input boxes of time, VTBI and rate with the up or down keys.
Set time needed to pause.
Set VTBI to zero.
Set rate to zero.
Press
.
Preview and modification of each programming stage
When no need more program infusion parameters, press
to enter the overview interface, check
whether the parameters of each programming stage are correct; if some parameters of certain stage are
found, then move the cursor with the up and down key to the wrong stage, press
to correct.
Choose incorrect stage
After correcting, press
to enter the overview interface again.
Press
to start programming infusion.
