Wireless & Spy 16 Channel User Manual Download Page 64

Page: 64 / 83

Motion recording status

Alarm In connection and operating status

Alarm Out connection and operating status

Version

Recording start/end date and time

8.5.1

Camera Connections and Operating Status



Camera is in normal operation.



Camera is not in use.



Camera is not connected or Video Loss.



Camera is Covert status.

8.5.2

HDD Connections and Operation Status



HDD is in normal operation.



HDD is not connected (up to 4).



HDD has an error.

8.5.3

Recording Status



In recording.



Recording is stopped.



Above the maximum number of cameras allowed.

8.5.4

Motion Recording Status



In motion recording.



No motion recording is available.



Above the maximum number of cameras allowed.

8.5.5

Alarm In Connection and Operating Status



Alarm In is On.



Alarm In is Off.



Above the maximum number of Alarm In allowed.

8.5.6

Alarm Out Connection and Operating Status



Alarm Out is On.



Alarm Out is Off.



Above the maximum number of Alarm Out allowed.

8.6

REMOTE SETTING



You may change DVR‘s Menu setup through CMS.



Remote Setting works only in Watch mode.

Summary of Contents for 16 Channel




















































































Search results

Summary of Contents for 16 Channel

Reviews:

Related manuals for 16 Channel

Brands by name

Popular brands

Wireless & Spy 16 Channel, User Manual

Search results

Summary of Contents for 16 Channel

Reviews:

Related manuals for 16 Channel

Brands by name

Popular brands