19
Import:
Copy the Menu setup stored in USB memory stick into DVR. Please plug in the memory stick and then click (
)
Import.
Export:
Store the Menu setup of DVR in USB memory stick. Please plug in the memory stick and then click (
) Export.
When you are working on Default, Import, Export, a message box will ask the progress and click the confirmation icon, then
a message box will show whether its success or failure.
System Log
Export:
Store the System Log contents in USB memory stick. Please plug in the memory stick and then click (
) Export.
When you are working on Default, Import, Export, a message box will ask the progress and click the confirmation icon, then
a message box will show its success or failure.
When you complete Status data input, please click (
) Version, and the following screen will appear.
Version Upgrade
You may upgrade DVR software.
Please follow the Upgrade procedure below.
①
Plug USB memory stick having upgrade file into DVR.
②
Click (
) Load frame. Then, software version stored in the USB will appear on the left-hand side.
③
Click (
) Start frame to start the upgrade.
④
When the upgrade is completed, a dialogue box pops up. Please choose ‗OK‘ and DVR will auto-reboot.
When you complete Version input, please click (
) Record. Then, the following screen will appear.
CAUTION
PLUGGING OUT USB DEVICE OR FORCED POWER-OFF MAY CAUSE PERMANENT DAMAGE.
CAUTION
DO NOT UPGRADE UNTIL YOU INSTALL A HARD DISK DRIVE. MAKE SURE YOU UPGRADE WHEN HDD IS IN PROPER
OPERATION.
Version
Record
