Wireless & Spy 16 Channel User Manual Download Page 42

Page: 42 / 83



Select cameras for recording while the motion sensor is in operation, and alarm outputs, and set up E-mail addresses for

notification.



Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.



Please follow the setup procedures below.

①

Click (



) Motion Event frame, and select Motion Event 1.

②

Select cameras for recording when Motion Event 1 is on. Please check



a check box under Link Camera. More than

two cameras can be set.

③

Select alarm outputs to be worked when Motion Event 1 is on. Please check



a check box under Link Alarm Out. More

than two alarm outputs can be set.

④

Select E-mail addresses for notification when Motion Event 1 is on. Please check



a check box under Link Notification.

More than two E-mail addresses can be set.

⑤

Repeat the above procedure for Motion Event 2~ Motion Event 16.



Click(



)By Duration box to set up the recording duration and prevent recording caused by event.

The duration time can be controlled by previous setting mode: RECORD>Settings>Event



hoose ‗OK‘ to confirm the setting.

4.6.3

Video Loss



Please click (



) LINK>Video Loss, and the following screen will appear.



Select cameras for recording while the motion sensor is in operation, and alarm outputs, and set up E-mail addresses for

notification.



Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.



Please follow the setup procedures below.

①

Click (



) Video Loss frame, and select Video Loss 1.

②

Select cameras for recording when Video Loss 1 is on. Please check



a check box under Link Camera. More than two

cameras can be set.

③

Select alarm outputs to be worked when Video Loss 1 is on. Please check



a check box under Link Alarm Out. More

than two alarm outputs can be set.

④

Select E-mail addresses for notification when Video Loss 1 is on. Please check



a check box under Link Notification.

More than two E-mail addresses can be set.

⑤

Repeat the above procedure for Video Loss 2~ Video Loss16.



Click No Beep



to deactivate alert sounds from video loss. Apply to all channel.



hoose ‗OK‘ to confirm the setting.

Summary of Contents for 16 Channel




















































































Search results

Summary of Contents for 16 Channel

Reviews:

Related manuals for 16 Channel

Brands by name

Popular brands

Wireless & Spy 16 Channel, User Manual

Search results

Summary of Contents for 16 Channel

Reviews:

Related manuals for 16 Channel

Brands by name

Popular brands