10
2.1
Hard disk and CD-RW Installation
2.1.1
SATA Port
Main substrate of this DVR has three SATA ports: they are indicated as SATA 1,2 and SATA 3.(
A Type
)
Main substrate of this DVR has four SATA ports: they are indicated as SATA 1,2 and SATA 3,4.(
B Type
)
Up to two SATA devices (hard disk, CD-RW, and DVD-RW) are connected in Serial to the SATA ports, but the devices must
be connected correct SATA port.
Please mount CD-RW (or DVD-RW) at the
SATA 3 port.
(
A Type
DVR)
Please mount CD-RW (or DVD-RW) at the
SATA 4 port.
(
B Type
DVR)
Refer to below table to mount a hard disk and CD-RW (or DVD-RW).
A Type
Storage
SATA 1,2 Port
SATA 3 Port
HDD
CD or DVD-RW
1
2
3
A Type 4/8/16
Channel DVR
1
1
HDD
----
CD-RW (DVD-RW)
2
1
HDD
HDD
CD-RW (DVD-RW)
B Type
Storage
SATA 1,2 Port
SATA 3,4 Port
HDD
CD or DVD-RW
1
2
3
4
B Type 4/8/16
Channel DVR
1
1
HDD
----
----
CD-RW (DVD-RW)
2
1
HDD
HDD
----
CD-RW (DVD-RW)
3
1
HDD
HDD
HDD
CD-RW (DVD-RW)
4
----
HDD
HDD
HDD
HDD
2.1.2
No Jumper Designation
SATA device does not use jumper. You only need to connect SATA device to SATA port according to HDD/ CD-RW (or
DVD-RW) you have. A connector for designation is located between the 7-pin SATA connector and the 15-pin Power
connector.
2.1.3
HDD Installation
Securely fix a hard disk by using bracket and screws provided herewith.
Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.
Otherwise, it may cause damage to the hard disk.
CAUTION
Install hard disk after DVR power is off. Otherwise, it may cause permanent damage to the hard disk. To turn off DVR, please click (
)
SETUP>SYSTEM>Shutdown. Also, wait for 5 seconds before plugging in power supply again.
2. Installation
