28
Chronosonic
XVX
Inst allation Guide
disposal/recycling of household toxic wastes.
2. Cover the metal terminals on the ends of the battery pack with
insulating tape before disposal to prevent accidental short-cir-
cuiting.
3. Never dispose of a battery pack by throwing it into a fire. Bat-
tery explosion could result.
4. Never discard a used battery pack with ordinary solid wastes,
since it contains toxic substances.
5. If required, return to Wilson Audio Specialties Inc. for disposal
or recycling. Contact your dealer for instructions.
Section 2.7—Installing the Upper Modules into the Gantry
Installing the Lower Submodule into the Gantry
Note: Enlist the help of an assistant to safely install the Lower submodule,
which consists of the Lower Midrange Module and the 4-inch Midrange
Module, into the Gantry. The assembled submodule is quite heavy, and
requires at least two experienced installers to install correctly. One install-
er should be positioned at the rear of the Gantry to guide the module into
place. Care should be taken to avoid scratching the front woofer with the
rear spike.
A u t h e n t i c E x c e l l e n c e
™
s
e C t I o n
2 �7—I
n s ta l l I n G
t h e
u
P P e r
M
o d u l e s
I n t o
t h e
G
a n t ry
29
1. Turn on the two lights to aid in the setup of the modules in the
Gantry.
2. Loosen the stepped block located on both the lower microme-
ter by rotating the knurled bolt counter-clockwise just until it
slides freely fore-to-aft.
3. Unlock the upper and lower Micrometer by rotating the two
oval-head locking bolts on the left side of the Micrometer.
4. The lower Micrometer adjustment knob faces upward in the
rear of the Gantry. Using the knob, move the Chronosonic XVX
Micrometer Lower Module assembly as far forward (toward the
front of the loudspeaker) as it will go.
5. Using the upper of the two rotary knobs, found on the right
side of the Gantry, move the upper Micrometer all the way to
the rear of the Gantry.
6. Locate the Alignment Chart labeled “XVX Lower Array Align-
ment Block Step.”
7. The alignment block has numbers engraved on its right side
that correspond to an assigned step. Locate the correct num-
bered step from the chart. The rear spike will rest on this step.
8. The module is installed from the front of the loudspeaker. Po-
W i l s o n A u d i o S p e c i a l t i e s
Summary of Contents for Chronosonic XVX
