24
Chronosonic
XVX
Inst allation Guide
3. Invert the Tweeter Module so the bottom is now facing upward.
Install two the ball post spikes into bottom-front receptacles.
4. Reference the Propagation Delay Table labeled “Tweeter Mod-
ule Spike Length”. Locate the corresponding ear height and
listening distance for the upper-midrange module.
5. If there is number in the converging box, the Tweeter Module
requires a spike. The spike number is stamped into the flat
surface at the top of the spike. Locate the required spike in
your spike kit, and install into the rear spike receptacle on the
bottom of the module.
6. No hardware is installed into the Upper Midrange Module.
Note: The Tweeter Module and the Upper Midrange Module are installed
separately into the Chronosonic XVX Gantry Array. Do not assemble the two
modules at this point of the process.
7. Return both modules to the staging area.
Section 2.5—Installing the Gantry Onto the Woofer Module
Note: The Chronosonic XVX Gantry is extremely heavy. Ideally, four installers should be
present for the safe installation of the Gantry to the Woofer Module.
A u t h e n t i c E x c e l l e n c e
™
s
e C t I o n
2� 5 —I
n s ta l l I n G
t h e
G
a n t ry
o
n t o
t h e
W
o o f e r
M
o d u l e
25
Installing the Gantry
The Gantry is pre-assembled before shipment. The top of the
Woofer Module features a recessed area within which the Gantry re-
sides. Use the following steps to install the Gantry.
1. Lift the Gantry onto the Woofer Module. Take care to
avoid damaging the painted surfaces as you guide
the Gantry into its recessed receptacle.
2. There is intentionally a small amount of play within
the recessed receptacle to allow for accurate installa-
tion of the Gantry. Align the six countersunk holes in
the bottom plate of the Gantry with the correspond-
ing receptacles on the top of the Woofer Module.
3. In the toolkit, locate the six (for each channel) 1/2”
countersunk head bolts.
4. Using the 5/16” Allen wrench, install the six bolts
securing the Gantry to the woofer.
5. Tighten to secure, but take care not to over tighten.
W i l s o n A u d i o S p e c i a l t i e s
Summary of Contents for Chronosonic XVX
