WILSON AUDIO Chronosonic XVX, Installation And Care Manual

Page: 5 / 36

8
Chronosonic
XVX
Inst allation Guide
A u t h e n t i c E x c e l l e n c e ™
Section 1.1—Chronosonic XVX Crate Content
Please take the time before you attempt to set up your Chronosonic XVX to
review the contents of your Chronosonic XVX tool and spike kit. Set these items
in an accessible area as you will need them during the setup process. See the two
graphics below:
Section 1.2—Staging the Chronosonic XVX
Note: To avoid damaging the XVX’s painted surface. Please remove any jew-
Caster Wrench
Universal Allen Driver
1 1/2" Set Screws
1/4" Allen Elbow
3/4" Combo Wrench
1/2" Nut Driver
5/16" Allen Elbow
3/32" Allen Bit
1/8" Allen Bit
9/64" Allen Bit 5/32" Allen Bit
0.10 ohm 1.0 ohm 1.5 ohm
3.20 ohm 2.1 ohm
Resistors
XVX
Tool Kit
Cool Fall Light
Charging Cable
Spike Pad
QTY - 8
Mechanical Diode
QTY - 8
"A" Spike
QTY - 8
Spike with nut
QTY - 8
#2 Spike
QTY - 4
#3 Spike
QTY - 2
#4 Spike
QTY - 2
"Round Tip" Spike
QTY - 10
XVX Spike Kit
s
e C t I o n
1� 2— s
taG I n G t h e
C
h ro n o s o n I C
XV X
9
elry such as rings, watches, necklaces, and bracelets during this process.
Organize the Modules by Channel
It is extremely important the XVX be assembled with elements assigned to
each channel. Each of the modules are labeled with a serial number. To start the
process of ensuring that each of the modules and the Chronosonic XVX Gantry
is assembled in its appropriate channel, Wilson recommends that the modules
are separated and organized by channel according to serial number. Stage the
W i l s o n A u d i o S p e c i a l t i e s