38
Chronosonic
XVX
Inst allation Guide
s
e C t I o n
3�1—d
r e s s I n G
t h e
C
a b l e s
39
W i l s o n A u d i o S p e c i a l t i e s
A u t h e n t i c E x c e l l e n c e
™
ture, ensuring the cable remains in the circular slot.
7. Attach the Lower Midrange Cable to the binding post col-
or-coded and labeled “Lower 7” Mid.”
8. Repeat this process for the 4-inch Midrange Module, this time
feeding the cable through the left-most slot on the cable
dressing fixture. Attach the 4-inch Midrange Cable to the bind-
ing post labeled 4” Mid.
9. Tighten the adjustable cable clamp on the back of the module.
Connecting the Upper Submodule
10. Starting with the Tweeter Module, feed the cable exiting the adjust-
able wire clamp from the module up over the upper cross brace.
Drape the cable over the cross brace.
11. Slightly loosen the adjustable breach-point cable clamp on the rear
of the Tweeter Module by twisting it counter-clockwise. Using the
connector plate as your guide, shorten the cable by pushing the
slack back into the module such that there is just enough cable to
safely and successfully connect it to its corresponding binding post.
12. After you have successfully shortened the exposed cable, gently
pull back on the cable-dressing fixture. You will see three opposing
half-oval slots in the center of the clamp. Feed the cable through the
center position of the center slot and release the fixture.
13. In turn, feed the cable through the center position of the slot within
the lower clamp as well.
14. Attach the Tweeter Module Cable to the binding post labeled “Front
Tweeter.”
15. Repeat this process for the Upper Midrange Module, this time feed-
ing the cable through the left-most position of the center slot on the
cable-dressing fixture.
16. In turn, feed the cable through the left position of the center slot
within the lower fixture as well.
17. Connect the cable to the binding post labeled “Upper 7” Mid.”
18. Tighten the adjustable cable clamp on the back of the module.
19. Repeat this process for the Rear-firing Tweeter, this time feeding the
cable through the right-most position of the center slot on the cable
dressing fixture.
20. In turn, feed the cable through the right position of the center slot
within the lower dress fixture as well.
21. Connect the cable to the binding post labeled “Rear Tweeter.”
22. Tighten the adjustable breach-point cable clamp.
Summary of Contents for Chronosonic XVX
