Manual: R4000-XX-X-000-X-X_EN
Release: 1.20
©Elotech GmbH
Seite 42 / 48
Configuration sensors
Sensor
Linear 0…10 V
Voltage 0 to 10 V
Linear 0…20 mA
Current 0…20mA
Linear 4…20 mA
Current Live Zero 4…20mA
PT100 2-wire
Pt 100 (RTD) 2-wire connection -100…800°C
PT100 3-wire
Pt 100 (RTD) 3-wire connection -100…800°C
Ni120 2-wire
Nickel 120 2-wire connection 0…250°C
Ni120 3-wire
Nickel 120 3-wire connection 0…250°C
(TC) Fe-CuNi (J)
Thermocouple Type J 0…800°C
(TC) NiCr-Ni (K)
Thermocouple Type K 0…1200°C
(TC) Fe-CuNi (L)
Thermocouple Type L 0…800°C
NiCrSi-NiSi (N)
Thermocouple Type N 0…1200°C
(TC) PtRh-Pt (S)
Thermocouple Type S 0…1600°C
Please NOTE :
If the sensor selection is changed and the value is out of the new measuring
range, the following parameters will be reset.
Setpoint 1, Setpoint 2:
Setpoint min.:
Setpoint max:
Setpoint ramp rising/falling:
Limit values:
Actual process value offset:
Setpoint softstart:
softstart:
Setpoint limitation min.
Measuring range bottom
Measuring range top
off
off
off
setpoint min.
off
