Manual: R4000-XX-X-000-X-X_EN
Release: 1.20
©Elotech GmbH
Seite 7 / 48
4.5
Connection
Diagram: Relay Outputs
4.6
Connection diagram Continuous outputs (option)
If continuous outputs are existed, the relay outputs are not available.
The GND connection terminals C5 - C7 and H5 - H7 are bridged. The output automatically
switches to current or voltage, depending on the connected load.
4.7
Connection diagram E-Bus for extension module
The extension module R4010, for exptension to 12 or 16 zones, is
connected to the R4000 via the E-bus.
The lines „E-Bus L“ and E-Bus H“ must be connected to the
corrosponding terminals of the R4010.
The connection must be designed as a shielded cable. The shield has
to be conneted the earth (housing) at the R4010 side.
