Manual: R4000-XX-X-000-X-X_EN
Release: 1.20
©Elotech GmbH
Seite 43 / 48
Configuration Output digital
A digital output (logic output) is available for each zone. Select the desired output signal.
Configurations that are not possible are not displayed. Like "cooling" in this example.
Digital 1 ... x
Description see 5.4.7.7 Control outputs
Configuration Output relay
For every zone one relay output is available. Select the desired output signal.
When using it as a control output, make sure that the switching cycle time is set as long as
possible to minimize contact wear on the relay.
Configurations that are not possible are hidden. In the example, heating and cooling can be
selected because the zone has been configured as a "heating-cooling" zone. (3-point heat-
ing cooling)
Relays 1 ... x
Description see 5.4.7.7 Control outputs
Configuration of continuous outputs (option)
A continuous output is available for each zone. Select here the desired output signal.
Configurations that are not possible are hidden, such as "Cooling output level" and "Cooling
output level". Live Zero ", in the picture below.
Continuous 1 … x
Description see 5.4.7.7 Control outputs
