Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 6

Page: 6 / 66

Song Meter SM4BAT FS User Guide

2 Overview

Wildlife Acoustics, Inc.

page

Overview

2.1

Introduction

The latest generation in the Song Meter series, the SM4BAT FS is a weatherproof,

programmable, single channel, full-spectrum, ultrasonic recorder designed for

the periodic, seasonal, and long-term monitoring of bats and other ultrasound

wildlife in almost any environmental condition. The SM4BAT FS creates high-

quality, full-spectrum 16-bit WAV recordings that can be easily viewed or

analyzed using our Kaleidoscope software (or third-party software).
You can schedule daily recordings to meet a variety of needs including times

that are relative to sunrise and sunset, specific duty cycles with on/off recording

patterns, and continuous monitoring all day and all night. The SM4BAT FS

optimizes battery life and memory capacity to record for extended periods of

time. Using both memory slots and new alkaline batteries, a typical deployment

can record for up to 450 hours spanning weeks or months.

Features

■

Lightweight, portable, and completely weatherproof

■

One-channel full-spectrum 16-bit WAV recorder

■

Intelligent recording trigger and noise scrubber to minimize false recordings

of non-bat activity

■

Up to 45 nightly 10-hour recordings using four (4) alkaline D batteries

■

SMM-U2 and SMM-U1 microphones support cables up to 100m(includes 3m)

■

Supports one or two standard SDHC or SDXC memory cards

■

Weatherproof keypad and backlit display for easy entry and status

■

Dual-color LED indicator provides recording and triggering feedback

■

Integrated top and bottom mounting flanges are designed to work with cable

locks, screws, radiator clamps, bungee cords, and other fasteners

■

Easy to set up and use with convenient Quick Start daily recording schedules

and one-touch start

■

Advanced Schedule mode allows creation of more advanced schedules

■

Customize schedules and estimate impacts on SD memory cards and battery

life with the free SM4 Configurator software

■

One-touch status check shows memory card utilization, battery voltage, and

other recorder health information without interrupting recordings

■

External power option using an SM3/SM4 power cable (sold separately)

■

Self-generated diagnostics assist in basic troubleshooting

■

Internal

temperature and battery voltage logging

■

Headphone port for real-time monitoring and system verification

■

Optional GPS accessory automatically sets the date, time, latitude, and

longitude and logs recording coordinates

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands