Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 32

Page: 32 / 66

Song Meter SM4BAT FS User Guide

5 Making Scheduled Recordings

Wildlife Acoustics, Inc.

page

2017-Apr-25 23:50:48

Currently Recording:

B 18:45-07:15 #00101

ARMED @ SR=384k

2017-May-22 23:50:48

Currently Recording:

B 18:45-07:15 #00101

TRIGGERED @ SR=384k

2017-Apr-25 23:50:48

Currently Recording:

B 18:45-07:15 #00101

PREPARING @ SR=384k

The following screen appears when recording with the trigger off:

2017-Apr-25 23:50:48

Currently Recording:

B 18:45-07:15 #00102

RECORD @ SR=384k

These example screens show the following details:

Line 1:

The current date and time.

Line 2

: The

Currently Recording:

status message.

Line 3

: The current SD memory card slot that the recorder is writing to (

followed by the beginning and ending times of the current recording period or

CONTINUOUS

if the schedule is set to record all the time (the Quick Start

Record Always

schedule for example)

On the right side of the same line is the

running count of recording files saved since the recorder was last powered on.

Line 4

: The state of the device and the sample rate.

■

PREPARING

: the recorder is writing the file to the SD memory card.

■

ARMED

: the recorder is waiting for audio activity to trigger a recording.

■

TRIGGERED

: the recorder is making a triggered recording.

■

RECORD

: a non-triggered recording is being made.

5.4

Checking the Status of the Recorder

We recommend that you perform this procedure to check the status of the

recorder and SD memory cards before every deployment.

Press the

CHECK STATUS

button.

NOTE:

When the recorder is sleeping, you must press and hold the button to see status.

First you will see a boot screen and then the “Going to sleep until” screen appears.

Another press of the Check Status button is required to view the Check Status screen

shown below.

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands