Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 26

Page: 26 / 66

Song Meter SM4BAT FS User Guide

4 Settings

Wildlife Acoustics, Inc.

page

the maximum duration, and within the frequency range you specified. If two

such signals exist, the file is saved; otherwise, the file is not saved.

A value of

1.5 ms is recommended for recording bats.

NOTE

: To disable the scrubber, set

Min Duration

and

Max Duration

none

Range

: none, 0.1 to 99.9 milliseconds in 0.1-millisecond increments

Default

: 1.5 ms

Max Duration

Sets the maximum duration of a signal in the specified frequency range that

qualifies as a valid signal for the scrubber. A value of

none

is recommended for

recording bats.

Range

: none, 1 to 500.0 milliseconds in 1-millisecond increments

Default

: none

Min Trig Freq

Use this command to set the lower bound for the frequencies of interest to the

triggering mechanism and noise scrubber. Echolocation calls or other signals

occurring below this frequency do not cause a trigger and are considered noise

to the scrubber. A setting of 16 kHz works well for most bat applications. It may

be necessary to reduce this setting for recording lower-frequency species.

Range

: 6 to 99 kHz in 1-kHz increments

Default

: 16 kHz

Trigger Level

Specifies the digital trigger level. The trigger is satisfied if a signal exceeds the

specified dB level and is above the frequency defined by

Min Trig Freq

. The

recorder creates an individual time-stamped WAV file for each triggered event

during the scheduled recording period.

NOTE:

The trigger is inactive for up to a second after the end of a triggered recording

to allow time for the file to be written.

Turning on the trigger also activates file scrubbing. For information on the

scrubber, including how to turn it off, see

Min Duration

When you turn off the

Trigger Level

setting, the

Trigger Window,

Min Trig

Freq, Min Duration

and

Max Duration

settings are ignored and continuous

recordings are made as defined in the recording schedule and subject to the

Max Length

setting.

Range

: off, 6, 12, 18, or 24 dB

Default

: 12 dB

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands