Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 28

Page: 28 / 66

Song Meter SM4BAT FS User Guide

4 Settings

Wildlife Acoustics, Inc.

page

recording. It is best to experiment with your particular environment to make sure

the increased noise is either undetectable or tolerable.
Wildlife Acoustics’ Kaleidoscope Viewer and Pro software can natively open the

compression formats. The free Kaleidoscope Converter can be used to convert

the files to standard WAV format for use in other software packages.

Additionally, the W4V algorithms are open-source under GPLv3 license. Please

Values (Hz):

none, W4V-8, W4V-6, or W4V-4

Default

: none

4.7

Setting a Delayed Start

The Delay Start setting waits until a future date to start your schedule. The

recorder delays the start of the schedule until 00:00 of the specified day.

Navigate to

Main Menu

Settings

Delay Start

Set a future start date and set

Enable

yes

NOTE

: You can use this feature to synchronize the start of two or more recorders.

When you start the schedule, a warning appears reminding you of the delayed

start. If the date is in the past, no warning appears and the schedule starts

without delay.

4.8

Setting the LED Indicator Mode

The LED indicator in the keypad blinks to indicate the recorder status. The LED

blinks red once every two seconds when in an armed state waiting for a trigger

and green once per second when triggered. This light is visible on the front of

the recorder even when the security cover is closed.

Navigate to

Main Menu

Settings

LED Indicator

Choose

always

5 minutes only

When you choose

5 minutes only

, the LED only appears for approximately

the first five (5) minutes of recording after you press

SCHEDULE START

CHECK STATUS

or until the first time the unit sleeps. This setting minimizes

drawing attention to the recorder and allows you to maintain some level of

camouflage when recorder security or visibility is a concern.

4.9

Advanced Settings

The following describes each advanced setting.

Setting a Minimum External Battery Voltage

You can set a minimum voltage cutoff to help prevent damage to external lead

acid batteries from over-discharge. If the external battery voltage falls below this

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands