Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 50

Page: 50 / 66

Song Meter SM4BAT FS User Guide

9 Utilities

Wildlife Acoustics, Inc.

page

Utilities

9.1

Exporting Diagnostics

This procedure exports a diagnostic file that can be used to assess the audio

performance, settings, schedule, and status of the recorder. The Wildlife

Acoustics Support Team can use this information to help diagnose problems.

The recorder will also create a dump file temporary loss of power for over five

seconds or if it senses other types of failures.

Insert an SD memory card into slot A.

Navigate to

Main Menu

Utilities

Export Diagnostics

The recorder performs internal diagnostic tests and then exports the test

results, the current schedule, and the settings to a file. The file is named with

the recorder prefix, the date and time, and the .sm4dump extension:

PREFIX_YYYYMMDD_hhmmss.sm4dump

Remove the SD memory card and insert it into a computer in order to send

the file to Wildlife Acoustics.

9.2

Resetting to Factory Default Settings

This procedure restores all recorder settings to their original default values as

they were configured when your recorder was first assembled and tested.

Navigate to

Main Menu

Utilities

Set factory default

Select

Yes

on the confirmation screen.

CAUTION

: When you select

Yes

and reset defaults, your custom settings and any edited

schedules are erased.

9.3

Calibrating Microphones

Use the available Ultrasonic Calibrator to calibrate an attached SMM-U2 or

SMM-U1 microphone. Since ultrasound is beyond the range of human hearing,

verifying performance requires special equipment. The Ultrasonic Calibrator

helps you test both the microphone and the full recorder system.
The calibrator uses a 9V alkaline battery (included with the calibrator). When the

battery is depleted, the calibrator can no longer provide a tone and its LED no

longer illuminates. While the recorder may still emit sound at this point, it cannot

be used as an accurate calibrator until the battery is replaced.
The calibrator offers two modes of operation:

■

CAL

: Calibration mode is used to test the microphone at close range.

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands