Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 55

Page: 55 / 66

Song Meter SM4BAT FS User Guide

9 Utilities

Wildlife Acoustics, Inc.

page

Insert an SD memory card in slot A and an optional second card in slot B.

Navigate to

Main Menu

Utilities

Format All Cards.

At the

Confirm: Format All?

prompt:

■

Select

to cancel this procedure. Any existing data files remain on the

SD memory card(s).

■

Select

Yes

to format the SD memory cards in both slots.

If you select

Yes

, progress messages appear, and then the display returns to

the

Utilities

menu.

9.6

Updating the Firmware

The SM4BAT FS is field-upgradeable. Firmware updates are periodically available

with fixes or improvements.

Download new firmware from

www.wildlifeacoustics.com

. (While visiting our

website, you can join our mailing list to receive important notices about

your SM4BAT FS and related products.)

Save or copy the firmware file to the top-level directory (not in a folder) of

an SD memory card and insert it into the recorder in slot A.

Navigate to

Main Menu

Utilities

Firmware Update

The recorder scans the SD memory card for

.SM4

firmware files.

At the

Select upgrade file

prompt, select the firmware update file and

press

ENTER

. The recorder applies the new firmware and restarts.

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands