Wildlife Acoustics Song Meter SM4BAT FS User Manual Download Page 49

Page: 49 / 66

Song Meter SM4BAT FS User Guide

8 Importing and Exporting Schedules

Wildlife Acoustics, Inc.

page

Navigate to

Main Menu

Schedule

Import Sched+Setts

At the

Select Schedule File

prompt, press

▲

▼

Down

to select a

schedule file on your SD memory card. Press

ENTER

NOTE:

The file name must be 28 characters or less. The recorder does not recognize or

display longer file names on the import screen.

If no warnings or errors are found, the following message appears and the

imported schedule is now the current schedule:

Schedule imported

Press

◄

Left

to return to the

Schedule

menu. You can now edit or start the

schedule.

NOTE

: Schedules exported from a recorder and imported on another will not override

the second recorder’s

Prefix

Latitude

Longitude

Time zone

, or

Battery Cutoff

settings. Schedules created or edited by the Song Meter SM4 Configurator software

have the option to override any of those settings.

8.3

Exporting a Schedule

You can export the schedule including its settings to an SD memory card. The

Simple schedule is exported as well as the Advanced Schedule, if one was

created. Which schedule will be loaded upon import to another recorder

depends on the selected schedule mode as set in Advanced Settings on the

recorder you are exporting from.

Insert an SD memory card in slot A.

Navigate to

Main Menu

Schedule

Export Sched+Setts

The following message appears:

Schedule exported

The exported file is named with the recorder prefix and the .SM4S extension. For

example: SM400155.SM4S
The default prefix is the device model and serial number. You can specify a new

prefix on the recorder in the settings.

CAUTION

: If a file with that name already exists on the SD memory card, it is

overwritten.

After exporting the schedule, you can share it with others, load it on another

recorder, or edit it using the SM4 Configurator software.

Summary of Contents for Song Meter SM4BAT FS



































































Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands

Wildlife Acoustics Song Meter SM4BAT FS, User Manual

Search results

Summary of Contents for Song Meter SM4BAT FS

Reviews:

Related manuals for Song Meter SM4BAT FS

Brands by name

Popular brands