Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
25.03.14
Working Instructions WIDOS ASM 315 WM
Page 24 of 45
After the heating time has elapsed release the clamping lever (5), open the machine with
cross handle (8), remove the heating element as quickly as possible and join the pipes in a
shock-free manner.
The maximum time frame for this process is predetermined by the value for the change over
time taken from the table.
When the welding force is built up, arrest the support with clamping lever (5) and press the
stop-watch.
If necessary, re-adjust the force during the cooling time
(cooling force = adjusting force).
After expiration of the cooling time, hold the cross handle (8) fixed, release the clamping
lever (5) and release the force.
Open the clamping tools, remove the welded part and open the support.
T h e w e ld in g p r o c e s s is f in is h e d .
