Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
25.03.14
Working Instructions WIDOS ASM 315 WM
Page 17 of 45
4.3. Drill and clamping bracket
No. Denomination
Function
18
Button
- to switch the drill on / off only if the drill has been activated
with switch <24> and locked with locking switch <25>
19
Grip
- to swivel the drill in / out of the machine
20
Drill plate
- retainer for drill and knife blocks
21
Knife holder
- to adjust the drill diameter (outer reading edge)
22
Scale
- to adjust the drill diameter
23
Centering drill
- to drill the centering drill hole into the main pipe
24
On / Off switch
- to switch drill on / off, drilling is carried out with button <18>
25
Locking knob
- to hold switch <24> on „ON“; the locking knob is released by
a short lifting of switch <24>
4.3.1. How to clamp the drill to the clamping tool
You must fix the drill into the right clamping tool in
order to carry out drilling (right image). Use the
turnstile to travel the drill afterwards.
Shift the swiveled-out drill into the machine
center.
Swivel the drill into the machine between main
pipe and right clamping tool.
Open the right clamping tool for branch pipe .
Shift the drill to the right with the cover of the
drill towards the ledge of the clamping tool.
Shut the clamping tool and fix the drill into the
clamping tool.
18
19
20
23
21
22
24
25
Cover of drill
Ledge
