4-12
REMOVING THE DRAIN PUMP
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
2. Turn off the water supply to the washer
3. Use cardboard or padding to lay washer
on the front cabinet.
4. Disconnect hoses
5. Remove the harness from the pump
motor.
6. Remove hose clamp and hose,
see figure 1.
7. Remove three (3) mounting screws,
see figure 2.
8. Remove pump assembly, see figure 2.
Figure 1
Figure 2
Access to the drain pump is from the bottom
of the unit. The drain pump seals against
the tub at two points (see the image on the
right).
Screw Locations
Hose Clamp
Hose
Pump to Tub Seal Two
Points of Contact
1. Unplug washer or disconnect power.
Summary of Contents for Cabrio WTW5700XW
Page 58: ...4 22 NOTES ...
Page 84: ......
