Installation Manual: Whipple SC 21_F150_R5
Last Updated: June 12
th
, 2021
Page 3 of 39
www.whipplesuperchargers.com
PRE-INSTALLATION CHECKLIST
Before installing your Whipple Supercharger Kit, complete the following checklist.
1.
Verify Condition of Vehicle: Before the supercharger kit is installed, ensure the engine runs smoothly and that the
factory malfunction indicator light (MIL) is off. Only install the supercharger kit if the engine runs smoothly
and
the
MIL is off.
2.
!!
CAUTION
!!
This product is intended for use only on STOCK, UNMODIFIED, WELL-MAINTAINED
engines. Installation on a worn-out or modified engine is not recommended without factory computer
and fuel system modifications. Custom engine configurations could require custom tuning and other
supporting modifications.
3.
Verify Fuel System: Supercharger systems should only be installed on vehicles that have new or clean fuel filters.
4.
Assess Cleanliness of Installation Area: Make sure your work area and the under-hood area are free from debris.
This supercharger is a high-quality, close-tolerance compressor and must not be subjected to contamination by dirt
or any type of foreign material. If necessary, vacuum around engine to remove any foreign material.
5.
!!
CAUTION
!!
DO NOT remove the protective seal on the supercharger prior to installation. Foreign
material entering the supercharger will automatically void all warranties.
6.
Identify Supercharger Kit Components: Before beginning installation, identify all the components of your Whipple
Supercharger Kit and ensure all items are present and undamaged.
7.
!!
CAUTION
!!
Do not attempt to start the engine before adding the supplied Supercharger Oil to
the supercharger!
SAFETY PRECAUTIONS
CAREFULLY READ THE IMPORTANT SAFETY PRECAUTIONS AND WARNINGS BEFORE PROCEEDING WITH
THE INSTALLATION!
Appropriate disassembly, assembly methods and procedures are essential to ensure the personal safety of the individual
performing the kit installation. Improper installation due to the failure to correctly follow these instructions could cause
personally injury or death. Read each step of the installation manual carefully before starting the installation.
•
Always wear safety glasses for eye protection.
•
Place the ignition switch in the off position.
•
Always apply the parking brake when working on vehicle.
•
Block the front and rear tire surfaces to prevent unexpected vehicle movement.
•
Operate the engine only in well-ventilated areas to avoid exposure to carbon monoxide.
•
Do not smoke or use flammable items near or around fuel system.
•
Use chemicals and cleaners only in well-ventilated areas.
•
Batteries can produce explosive hydrogen gas which can cause personal injury. Do not allow flames, sparks or
flammable sources to come near the battery.
•
Keep hands and any other objects away from the radiator fan blades.
•
Keep yourself and your clothing away from moving parts when the engine is running.
•
Do not wear loose clothing or jewelry that can be caught in rotating or moving parts.
