Installation Manual: Whipple SC 21_F150_R5
Last Updated: June 12
th
, 2021
Page 29 of 39
www.whipplesuperchargers.com
77.
Using a 10mm socket, remove the stock coolant reservoir LH side bolt. Install the IC filler tee bracket under the
coolant reservoir mounting tab. Reinstall factory bolt. Secure filler tee to the bracket using the (2) 6mm x 14mm
HHFCS (10mm allen socket).
78.
Install the ¾” ID x 32” hose (#3103094) and the 3/8” ID 39” (#3103098) rubber hoses to the IC filler neck. Secure
with supplied pinch clamps. Connect the ¾” hose to the IC pump inlet fitting, secure with pinch clamp. Secure 3/8”
vent hose with zip tie to the ¾” hose. NOTE: Ensure that this hose cannot kink or rub anything overtime.
79.
Install the ¾” ID x 12” rubber hose (#3103092) from the LH (OUTLET) IC fitting to the IC filler neck. Secure both
ends with supplied pinch clamps. This goes under the air inlet tube. NOTE: NEVER SWITCH THE INTERCOOLER
ROUTING, BANK 2 IS ALWAYS THE OUTLET!
