Installation Manual: Whipple SC 21_F150_R5
Last Updated: June 12
th
, 2021
Page 32 of 39
www.whipplesuperchargers.com
86.
Install the supplied panel filter to the airbox lower. Install the upper airbox to the top of the filter. Secure the top to
bottom using the supplied (6) 6mm x 16mm BHCS. Torque to 50 in-lbs. *Caution: Over torqueing can result in
pulling an insert out of plastic box.
87.
Install the (1) supplied 13/16” to ½” rubber grommet into the supercharger inlet tube. Install the supplied ½” to
15.82mm quick connect fitting.
88.
(Whipple 132mm Crusher throttle body) Install the supplied 5” ID x 2 1/2” silicone hose over air inlet tube and
airbox lid. Install the 4 ¾” x 3” silicone hose over throttle body. Install the air inlet tube between the filter and
throttle body. Slide silicone hose over throttle body. Secure all ends with the supplied (4) #80 hose clamps.
89.
(Stock throttle body installations) Install the supplied 5” ID x 2 1/2” silicone hose over air inlet tube and airbox
lid. Install the supplied reducer silicone hose over air inlet tube and stock throttle body. Connect the other end to
the stock throttle body. Secure all ends with the supplied hose clamps (2) #80, (1) #64 and (1) #56 on throttle
body.
