53
Switch programming can be composed of 6
different rates of output through a three-position
switch and a two-position switch. Each output user
can set it according to actual needs, which is
suitable for the use of some flight modes by some
flight control boards.
For details, please refer to the instruction manual
of the flight control board, and set the most
reasonable operation mode according to the user's
own usage habits.
Note:
Please verify the settings after setting. Remove
the paddles during commissioning verification to
avoid injury to the model.
Enter the interface:
→ Model Menu →
WFLY
Switch Programming
Setting method:
Press the - arrow keys to select the setting item,
and press the plus or minus key to adjust the value.
Click the Back button to exit the interface and save
the settings.
Touch screen - click to select the setting item
switching option, (click the value). Click the Settings
button on the right to edit the parameters. Click on
the feature name in the top left corner to exit the
interface and save the settings
Switch Program (Multicopter)
The throttle hold setting function can fix the
throttle servo in the low speed position when the
flameout is executed, and the throttle hold position
can be adjusted within ±75%. The preset switch
(custom) is responsible for switching this function.
Warn:
When debugging the machine, for safety, you
must turn on [Throttle Hold] and set the throttle
to no power output! Prevent misuse which leads
to hurt and endanger the safety of personal
property!
Note:
The throttle hold position needs to be applied
according to the specific conditions of the model.
(Position: The position where the throttle is hold!
0%, the default value!).
Interface Path:WFLY→Model Menu→Throttle
Hold
Setting method:
Press the - arrow keys to select the setting item,
and press the plus or minus key to adjust the value.
Click the Back button to exit the interface and save
the settings.
Touch Screen--Click to select the setting item
switching option, (click the value) and click the
setting button on the right to edit the parameter.
Click on the function name in the upper left corner to
exit the interface and save the settings.
Throttle Hold (Multicopter)
RX
NORM
4.2 V
SW1
SW2
SA
SB
Mode5
Mode6
Mode4
us
us
us
1550
1700
1850
Mode
2
Mode
3
Mode1
us
us
us
1100
1250
1400
Switch Program
Status
0 0: 06: 5 9
IN H
R X
NO R M
4 . 2V
S A
Switch
Throttle Hold
Status
+
0
%
Pos
0 0 : 0 6 : 5 9
INH
Model Menu
DANGER
