52
The idle down is a function that links the air
brake switch with the landing gear switch to make
the engine idle. In order to prevent the engine
from suddenly stalling during high-altitude flight,
the engine idle speed is set higher, and this
function is used when the engine idle speed
needs to be reduced when landing.
● The amount of descent reduction can be set.
● When the idle speed is reduced, the throttle
trim switch is used to adjust the amount of
descent reduction.
● The operation switch can be selected from
the switches SA, SB, SC, and SD.
Interface Path:
→Model Menu→Idle
WFLY
Down
Setting method:
Press the - arrow keys to select the setting
item, and press the plus or minus key to adjust
the value. Click the Back button to exit the
interface and save the settings.
Touch Screen - Click to select the setting item
switching option, (click the value) and click the
setting button on the right to edit the parameter.
Click on the function name in the upper left
corner to exit the interface and save the settings.
模拟器
RX
NORM
混控
4.2V
SA
+
0
%
INH
Rate
Idle Down
Status
Switch
0 0: 06 : 5 9
Set the amount of
descent reduction
Idle Down (Helicopter)
The fixed speed governor is used to control the
rotor speed of the helicopter, and the speed is
adjusted by the transmitter, and the governor signal
line is connected to the channel 7. Set the relevant
governor side. Refer specifically to the product
manual for the fixed speed.
Enter the interface:
→ Model Menu →
WFLY
Governor
Setting method:
Press the - arrow keys to select the setting item,
and press the plus or minus key to adjust the value.
Click the Back button to exit the interface and save
the settings.
Touch Screen - Click to select the setting item
switching option, (click the value) and click the
setting button on the right to edit the parameter.
Click on the function name in the upper left corner to
exit the interface and save the settings.
模拟器
R X
NO R M
混控
4.2V
SA
+
0
%
NO R
NO R
INH
Pos
Governor
Status
Switch
Rate
0 0 : 0 6 : 5 9
Select speed
switching switch
Selected mode
speed switching setting
Current mode
Governor(Helicopter)
The gyroscope function is only applicable to the
gyroscope with the hold tail function. The
transmitter adjusts the sensitivity of the gyroscope.
You can set four kinds of gyro sensitivity (switched
by flight conditions, normal, hold, stunt 1, stunt 2)
and operation mode. (Normal mode,hold mode).
Note: After the gyroscope function is turned on, in
[Aux Channel], channel 5 only outputs the rate value
set in [Gyro].
Enter the interface:
→ Model Menu →
WFLY
Gyro
Setting method:
Press the - arrow keys to select the setting item,
and press the plus or minus key to adjust the value.
Click the Back button to exit the interface and save
the settings.
Touch Screen - Click to select the setting item
switching option, (click the value) and click the
setting button on the right to edit the parameter.
Click on the function name in the upper left corner to
exit the interface and save the settings.
模拟器
R X
NO R M
混控
4 .2V
NO R
NOR
5
0%
IN H
Mode
Pos
Rate
NO R
Gyro
Status
0 0 : 0 6 : 5 9
Switch
Gyro working mode
Relative fly mode
Gyro output rate
C
u
rr
e
n
t m
o
d
e
Gyro (Helicopter)
Model Menu
