Wfly ET07, Instruction Manual

Page: 41 / 55

41
RX NO R M 4.2V Program Mix 1
Mix
Rate+
Rate-
Offset
THR Gyro
+ 0 %
+0%
+0 %
Ctrl SA
Status INH
0 0 : 0 6 : 5 9
Main Channel
Aux Channel
The program mixes is used to correct the special
properties of the aircraft, and is also used to control
the special travel combination. The mixing control
means that the auxiliary channel is driven by the
main channel.
The mixing rate can be adjusted freely so that the
aircraft's wrong tendency can be effectively
corrected. You can set the mixing switch to manually
control the activation and deactivation of the mixing.
The mismatch mode is controlled by a fixed or
pre-set offset to the target channel servo. The
program mix contains powerful linkage settings that
enable special or programmable mixing functions.
These functions can be separated. Set to the main
channel and the auxiliary channel.
Mixed channel
1. The default settings of the main channel and
the auxiliary channel are preset, so please set the
mixing channel firstly.
2. If main channel setting has set a channel or
switch/knob,the mixing amount on the side of the
auxiliary channel needs to be set. After the mixing
amount is set, the servo of the auxiliary channel is
only biased according to the set amount. .
3, As the main channel, in addition to selecting the
channel, you can also set the switch, or the knob as
an input.
The mixing control is used to correct the special
properties of the aircraft, and is also used to control
the special stroke combination. The mixing control
means that the auxiliary channel will be driven by
the main channel.
Curve Mixes 1-2
Program Mix 1-3
Switch selection
Control switch selecting for program mixes:
Select from switch SA~SD and throttle stick. If you
select the throttle stick as a switch, you can set the
throttle position and the direction of motion.
Interface path: →Model Menu→Program WFLY
Mix 1,2,3
Setting method:
Press the key-Press the arrow key to select the
setting item. Press the plus or minus key to adjust
the value (when setting the position of the control
throttle, select the value and press the confirm key
to get the position parameter!). Click the Back
button to exit the interface and save the settings.
Touch screen-Click to select the setting item
switching option, (Click the value) and click the
setting button on the right to edit the parameters
(when setting the position of the control throttle,
click the value to get the position parameter!). Click
on the function name in the upper left corner to exit
the interface and save the settings.
The mixing curve can be adjusted freely, and the
mixing can be set by a 9-point curve.so an error
tendency of the aircraft can be effectively corrected.
You can set the mixing switch or let the mixing
function work at any time.
RX 普通 4.2 V Curve Mix1
Mix 油门 起落架
Ctrl 油门 上 +50 %
Status 禁用
0 0: 06: 59
-50
- 1 00
- 150
0
+50
+ 1 00
+ 1 50
PO S + 0 % RARE + 0 %
R X NO R M 4 . 2 V Curve Mix1
- 10 0 % Rate
1/9
0 0 : 0 6 : 59
General Menu