16
Lit. No. 62639
October 5, 2001
HEADLAMP HARNESS INSTALLATION
Specific instructions for the installation
of the Plug-In Harness to the vehicle
headlights and the headlamp switching
relays will be found either in:
special instructions contained in
the harness kit specified in the
Selection List
or
in the installation instructions
found in the mount box.
INSTALLATION INSTRUCTIONS
CAUTION
Do not alter, modify, or install additional
components in shaded areas of Figure 31.
Failure to comply may cause damage to the
product or property.
Figure 31
CAUTION
Before drilling any holes, check both sides of
the material for any wires, fuel lines, fuel tanks,
etc., that may be damaged by drilling.
MOUNTING THE CABCOMMAND
HAND-HELD CONTROL
1.
Locate a convenient control mounting position in the
cab that will not interfere with other equipment and
will avoid unintentional activation of the snowplow.
2.
Using the control bracket as a template, mark and
drill three holes.
3.
Secure the control bracket to the truck inserting a
#6 x 1" tapping screw and a #6 spring lock washer
into each hole.
