8
Lit. No. 62639
October 5, 2001
INSTALLATION INSTRUCTIONS
90˚ Street
Elbow Fittings
Rod End
Fitting
45˚ Towards Rear
Base End
Fitting
Straight Up
38" Hose
Figure 16
Driver-Side
Rod End Hose
Passenger-Side
Rod End Hose
Figure 17
(Continued on next page.)
Passenger-Side
Rod Hose
Driver-Side
Rod End Hose
Figure 18
LIFT CHANNEL, HYDRAULIC UNIT,
HYDRAULIC FITTINGS & HOSES
ASSEMBLY (Continued)
11. Remove 3/8" square-headed plug from reservoir
and install reservoir filler plug.
12. Install a 90° street elbow fitting into each port in the
angling rams. Position fittings as shown in Figure 16.
13. Attach a 38" hose to the fitting on the rod end of
each ram.
(See Figure 16.)
14. Route rod end hoses through lift frame stops to avoid
pinched hoses.
(See Figures 16 and 17.)
15. Attach the 38" hoses to the 45° swivel fittings on
the hydraulic unit.
(See Figure 18.)