9
Lit. No. 62639
October 5, 2001
INSTALLATION INSTRUCTIONS
Driver-Side
Base End Hose
Passenger-Side
Base End Hose
Figure 20
Passenger-Side
Base End Hose
Driver-Side
Base End Hose
Figure 21
36" Hose
Figure 19
LIFT CHANNEL, HYDRAULIC UNIT,
HYDRAULIC FITTINGS & HOSES
ASSEMBLY (Continued)
16. Attach a 36" hose to the fitting on the base end of
each ram.
(See Figure 19.)
17. Route base end hoses behind lift frame angles.
(See Figures 19 and 20.)
18. Attach to 45° swivel fittings on the hydraulic unit.
(See Figure 21.)
NOTE: After plow is attached to vehicle, adjust
position of hydraulic fittings, if necessary, to
eliminate any interference between hydraulic
hoses and front of vehicle. Hoses must have
smooth contours with no sharp bends.