Wenglor SEFB Series, Operating Instructions Manual

Page: 44 / 161

Project Engineering 44
5.2 Functions
This section contains important information on the functions of the ESPE and their usage
5.2.1 Functions Overview
Detailed descriptions of the individual functions can be found in the following sections.
Section SEFB Muting SEFB
Operational functions
Safety operating mode / automatic restart Section 5.2.3.1 X X
Restart inhibit (RES) Section 5.2.3.2 X X
Contactor monitoring (EDM) Section 5.2.3.3 X X
Beam coding Section 5.2.3.4 X X
Cascading Section 5.2.3.6 X X
Range switching Section 5.2.3.6.4 X X
Muting functions
Cross muting Section 5.2.4.3 X —
Two sensor linear muting Section 5.2.4.4 X —
Four sensor linear muting (sequence monitoring) Section 5.2.4.5 X —
Four sensor linear muting (time monitoring) Section 5.2.4.6 X —
Adjustable muting duration Section 5.2.4.7.2 X —
Belt stop signal Section 5.2.4.7.3 X —
Muting enable Section 5.2.4.7.4 X —
Direction setting Section 5.2.4.7.5 X —
Muting end through clearing of the ESPE Section 5.2.4.7.6 X —
Partial muting Section 5.2.4.7.7 X —
Full Muting Enable Section 5.2.4.7.8 X —
Gap suppression Section 5.2.4.7.9 X —
Override Section 5.2.4.7.10 X —
Non-safety-related functions
Display setting (segment display) Section 5.2.5.2 X —
Signal output Section 5.2.5.3 X X
Integrated indicator lamp Section 5.2.5.4 X —
Alignment aid (signal strength) Section 5.2.5.5 X —
microSD memory card Section 5.2.5.6 X —
Password protection Section 5.2.5.7 X X (IO-Link)
IO-Link 1.1 interface Section 5.2.5.8 X X
X = function included
− = function not included