Multi-Beam Safety Light Array
35
9'&
06%DQGVWRSS)0(
9'&
5(62YHUULGH
060XWLQJ(QDEOH&DVFDGLQJ
06
06
&DVH*1'
\H
JQ
\H
\H \H \H \H \H
6RFNHW
6RFNHW
6RFNHW
6RFNHW
6RFNHW
6RFNHW
6RFNHW
)0( )XOO0XWLQJ(QDEOH
NOTE!
• Cross-connections between muting signals must be prevented via protected routing of
cables. For further information, refer to EN ISO 13849-2, table D.4.
• All connections must be sealed with cables or blanking plugs (to retain the IP degree of
protection).
4.9.11 Laser Alignment Tool Z98G001
Further information can be found in the operating instructions for the Z98G001.
4.9.12 LED Light Strips Z99G001
Further information can be found in the operating instructions for the Z99G001.
4.9.13 microSD Card
A microSD card can be used for easy duplication of configurations. The microSD card can be used as de-
scribed in
.
4.9.14 Parametrization Software wTeach2
The wenglor software wTeach2 can be used for easy parametrization and status monitoring.
The connection takes place via the IO-Link master EFBL003.
Further information can be found in the operating instructions for the DNNF005.