Parameters Configuration
102
1. Acknowledge the EDM mode by pressing the
key
2. Choose from “ON”, “OFF” and “<---” using the
or
key.
The parameters to be selected are shown flashing.
3. Acknowledge the selection by pressing the
key.
4. A selected parameter is displayed for approx. 2 s, before the display switches back to the upstream level.
9.5.4 Parametrization of the Beam Coding (CODE)
• For more information on the beam coding function, see
.
• If beam coding is used in combination with blanking operating modes and partial muting, beam coding
must first be taught in. Blanking or muting objects can then be taught in during an additional parameters
configuration procedure.
• The following steps are used for activation or deactivation:
Search
CODE
Selec-
tion
Switch on
OSSD
RES
SIG LOW
ERROR
Selec-
tion
OSSD
RES
SIG LOW
ERROR
Switch off
OSSD
RES
SIG LOW
ERROR
Back
OSSD
RES
SIG LOW
ERROR
Level 0
Level 1
1. Acknowledge the CODE mode by pressing the
key
2. Choose from “ON”, “OFF” and “<---” using the
or
key.
The parameters to be selected are shown flashing.
3. Acknowledge the selection by pressing the
key.
4. A selected parameter is displayed for approx. 2 s, before the display switches back to the upstream level.
