Parameters Configuration
126
The following procedure must be followed for changing the parameter configuration via IO-Link
1. Reset memory parameters, as block writing is not possible
• ParamEnd “Save + Restart”
delete or update
2. Password entry
• PasswordParamEntry: “0000” (current password)
“write”.
• ESPE enters parametrization mode (see above for operating display)
• Parameters can now be changed and saved.
3. Carry out changes and save as outlined above.
9.6.5 Data Storage
• For functional safety reasons, the devices have no data storage function.
• All parameters are saved in the ESPE or can be saved on the microSD card.
