Welch Allyn CP 150, Service Manual

Page: 38 / 133

Roaming PMK, OKC, CCKM
Update radio Touch
Update radio
to activate all new radio
settings not selected previously. Touch
OK
in the
confirmation popup.
Note
None of the changed radio settings
take effect until you touch Update radio .
4. Do one of the following:
• To continue in Advanced settings, touch another tab.
• To exit Advanced settings and return to the Home screen, touch
Exit
.
Specify TCP/IP settings
Note
Your model might not contain all of these features.
Note This task is applicable only to devices that have a radio installed and an
activated license.
1. In Advanced settings, touch the Network > TPC/IP tabs.
2. Specify TCP/IP settings.
Setting Action/Description
DHCP Select or deselect DHCP. Select DCHP to auto-connect
through TCP/IP. Deselect DHCP to manfully enter
settings.
Network IP address Touch and enter the IP address to manually set up
the device for TCP/IP communications.
Subnet mask Touch and enter the Subnet mask.
Gateway IP address that routes packets to other networks. Touch
and enter the Gateway address.
DNS Server 1 IP address of a server running DNS services for locating
computers and services through user-friendly names.
Touch and enter the DNS Server address.
DNS Server 2 Touch and enter the DNS Server 2 address.
Update radio Touch
Update radio
to activate all new radio
settings not selected previously.
Touch
OK
in the confirmation popup.
Note
None of the changed radio settings
take effect until you touch
Update radio
.
3. Do one of the following:
• To continue in Advanced settings, touch another tab.
• To exit Advanced settings and return to the Home screen, touch
Exit
.
Specify Server settings
1. Access the Advanced Settings.
a. Touch the
Settings
tab.
34 Settings CP 150 12-lead resting electrocardiograph