4 Transportation
4.1 Conveying the appliance to the installation location
Space required for conveying the appliance
Make sure that there is enough width and height along the entire route used for conveying the appliance to ensure it can get
through to its installation location.
The table below shows the dimensions of the appliances including packaging, which are needed to determine the minimum door-
way dimensions required to allow the appliance to be brought to its installation location:
6.10
6.20
10.10
10.20
Width
[mm]
1100
1345
1100
1345
Height
[mm]
1025
1025
1300
1300
Depth
[mm]
940
1140
940
1140
Load bearing capability for conveying the appliance
Provide moving equipment that is rated capable of carrying the load.
Refer to the weight of the appliance including packaging to determine the minimum working load limit of handling equipment; see
'Dimensions and weights 'Technical data' on page 65.
Conveying the appliance to the installation location for the first time
Please observe the following points when conveying the appliance:
■
Always move the appliance on a pallet.
■
Always move the appliance in an upright position.
■
Use a forklift truck or pallet truck to lift the appliance.
■
Move the appliance slowly and carefully, and secure it against tipping over.
Make sure that you do not knock against things with the appliance.
Avoid moving appliance along uneven routes or up or down steep slopes.
4.2 Preparing to unpack
Preparing to unpack
Perform the following tasks before unpacking the appliance:
■
Check the outer packaging for damage.
■
Take the unpacking instruction leaflet out of the shipping documents.
4.3 Scope of delivery
Appliance and Accessories
The following parts are supplied:
■
1x combi oven
■
1x left-hand rack
■
1x right-hand rack
■
1x empty canister (10 litres) for cleaning agent (optional)
■
1x suction nozzle with hose for cleaning agent (optional)
■
1x suction nozzle with hose for rinse aid (optional)
■
1x flat bend for installing the drain connection
■
1x empty canister for extracted grease (grill version)
■
1x connecting tube with attached screw-cap for grease collecting canister (grill version)
Documentation
The following documents are supplied with the appliance:
■
1x Installation manual
■
1x User manual (hardware)
■
1x Operating instructions (software)
■
1x Unpacking instruction leaflet
■
1x Checklist for installation and putting into service
4 Transportation
Installation manual
24
