4.
Place the brackets in the positions shown by your marks. Fix all the brackets
permanently to the worktable, either by screwing (1) or welding (2) depending
on the design of the tabletop.
5.
Place the appliance in the brackets fixed on the worktable and screw the
screws back in without tightening.
6.
Remove the cover from the appliance foot.
7.
Use the adjusting screw to level the appliance until it is seated horizontally. Use
the foot-adjustment tool or an adjustable pipe wrench to adjust the adjusting
screw, and a spirit level to check all horizontal surfaces are level.
The absolute tilt of the appliance in operation must not exceed max. 2° (3.5%).
Additional information:
The foot-adjustment tool is included with the customer documentation
5 Setting up the appliance
Installation manual
33
