4.
Check whether steam is being generated in the cooking chamber
(Open the appliance door carefully).
5.
Only for Convotherm 4 injection appliances:
Use the pressure regulator to adjust the pressure to give the correct reading at
the pressure gauge in the steam generation water supply:
■
[kPa] 100 (1 bar)
6.
Start fully automatic oven cleaning using the cleaning profile for light soiling.
7.
Check that the cleaning process runs without an error message.
Customer guidance and instruction
Instruct the user in all safety-related functions and devices. Instruct the user in how to operate the appliance, and complete the
checklist supplied with the appliance.
Warranty information
In order to be able to claim under the warranty for the combi oven, the appliance must be installed in accordance with the instruc-
tions in this installation manual by a qualified service engineer from an authorized service company. The manufacturer must be in
receipt of a fully completed checklist, enclosed with the appliance, before a warranty claim can be dealt with.
The warranty does not cover damage resulting from improper setup, installation, use, cleaning, use of cleaning agents, servicing,
repair or descaling.
To extend the spare parts warranty to 2 years, you need to register the appliance on the manufacturer's homepage
(www.convotherm.de) after installing the appliance.
7.3 Measuring appliance gaps
Measuring appliance gaps
The measured widths of the appliance gaps must lie within the following tolerance ranges:
Name
Measurement condition
Tolerance range
Door gap at the front of the appliance
The appliance door is closed.
12 ± 1 mm
If the door gap does not lie within tolerance, please contact Customer service.
7 Putting into service
Installation manual
63
