3.
Use the adjusting screw to level the appliance until it is seated horizontally. Use
the foot-adjustment tool or an adjustable pipe wrench to adjust the adjusting
screw, and a spirit level to check all horizontal surfaces are level.
The absolute tilt of the appliance in operation must not exceed max. 2° (3.5%).
Additional information:
The foot-adjustment tool is included with the customer documentation
4.
Refit the cover on the appliance foot.
5.
Stick the necessary warning labels in the specified positions. Make sure that
the surface is clean of oil and grease before sticking the warning label in place.
Additional information:
you can find the warning labels inside the cooking chamber.
Type and position of the warning sign stickers to be attached
The following warning signs must be attached to the combi oven in the specified positions:
Warning sign
Position on the combi oven
Somewhere on the left side of the appliance door in area 2 (see 'Warning signs on the combi oven' on page 15)
depending on the installation situation
Directly above the door handle if
■
the top of the appliance lies above 1.20 m or
■
personnel are mainly semi-skilled staff (recommended)
Right at the top of the appliance door if
■
the top of the appliance does not lie above 1.20 m
1.60 m above the kitchen floor.
5 Setting up the appliance
Installation manual
31
