Specialized Concentrated Focused
「
40
」
Operation
3.7.1 Software Interface
In Manual mode, press F6 to enter tool presetting interface, as shown in Fig. 3-23:
Fig. 3-23 Sub-screen of Tool Presetting
According to actual situation and needs, the adopted tool presetting method varies, with different
operations. See more as below.
3.7.2 Floating Presetting
Floating presetting is to execute tool presetting under current position with the thickness of its tool
sensor decided by the parameter
“ Cali block thickness”. It can be used to set the workpiece origin of
Z-axis. The system will automatically set the workpiece offset after floating presetting.
Workpiece offset= machine coordinate- thickness of tool presetter- public offset- tool offset
Generally, the default setting values of
public offset and tool offset are both “0”.
The sketch map of the process of floating presetting is shown in Fig. 3-24.
Work bench
Work piece
Tool sensor
Manually move the
machine to this position
Position before
presetting
①
Manually move to the upper
side of tool sensor
②
Repeated presetting
up and down
Fig. 3-24 The Process of Floating Presetting
