Specialized Concentrated Focused
Operation
「
39
」
Parameter
Definition
Setting Range
look ahead
distance
angel and then decide the speed planning
Predicted segment
No.
The predicted segment number in calculating
connetion speed
1~100
Whether to use
type S algorithm
Whether to use S-type algorithm for interpolation.
True: Use S-type
algorithm
False: Not use
The parameter decides whether to use S-type algorithm. When type S algorithm is adopted, the
max. acceleration of system will reach the twice of the single axis acceleration set in the system, so
setting a smaller value for parameter “Single axis acc” is recommended.
3.7 Tool Presetting
The process of tool presetting refers to the process of establishing the concrete position of workpiece
coordinate system (WCS) in machine coordinate system (MCS).
With the help of tool sensor (also called tool presetter or calibrator), tool presetting is realized. As shown
in Fig. 3-21, there are ports on the terminal board corresponding to CUT and COM on the tool sensor. If
necessary, such ports
as “Over-travel Protection” can be added to the terminal board according to
custome
rs‟ needs. According to the different installation positions of tool sensor, tool presetting is
divided into floating presetting and fixed presetting.
NC
RED CUT (Presetting signal)
BLACK COM
NC
GREEN (Over-travel Protection)
YELLOW COM
Fig. 3-21 Electrical Wiring Diagram of Tool Sensor
Fig. 3-22 is the sketch map for the using of tool sensor.
Work bench
Tool
sensor
Work piece
Tool
sensor
Height
Tool nose
(fixed presetting)
Tool nose
(floating presetting)
Height
Fig. 3-22 Sketch Map of Using Tool Sensor
