Specialized Concentrated Focused
「
66
」
Operation
Load
The shortcut key is F1, only valid under [Program] function section.
After the processing file is select
ed (press “↑“ or “↓” key to move cursor to the target file), pressing
shortcut key F1 will make the system load the file automatically,
[File Loading…] displaying the loading
progress. At the same time, the system will check the file being loaded automatically; if there is an error
in the file, an error prompt will be displayed in the information prompt bar to prompt the concrete error
position. After loading finishes, other operations are available.
If parameter N1101 “Select tool for ENG” is set as “True”, when an ENG file to be loaded has multi- tool,
a dialog will pop up when it is being loaded, as shown in Fig. 3-55.
Fig. 3-55 File lLoading Interface
Users can select a tool according to their own needs. Pre
ss “Up” and “Down” keys to select a tool, and
then press [OK] key to load the file. In case of tool change prompt after processing, end the program first,
and then reload the processing file and select the appropriate tool.
Unload
The shortcut key is F2, only valid under [Program] function section. This function is only available for the
loaded file.
After a file is loaded, the interface will be shown as Fig. 3-54. At this time, pressing F2 will unload the file
currently loaded automatically
. Note that “Unload” button in Fig. 3-53 is invalid.
After the file is loaded, its information will be displayed. After F6 “Parse Prog Info” is pressed, the system
will not drive the machine tool to do the relative mechanical and electronic actions, but only parse the file
processing range and predicted processing time. With this function, users can learn the details of
processing program in advance and make corresponding adjustments.
If the processing file is too large or enough information is acquired without the completion of parsing,
users can press F7 to stop parsing and start machining.
Edit File
The shortcut key is F4, only valid under [Program] function section.
