WEIHONG NK200, Manual

Page: 144 / 153

Specialized Concentrated Focused
「
132
」
Parameter Overview
Name Setting Range Default Effect Time Reference
Acceleration of
handwheel
0~100000 200 After reboot 3.14
Full feedrate for G00 Yes: Use; No: Not use Yes After reboot 3.14
Feedrate is valid for
manual mode
Yes: Valid; No: Invalid Yes After reboot 3.14
Use default speed Yes: Valid; No: Invalid Yes 3.6.1
Use default spindle
speed
Yes: Valid; No: Invalid Yes Immediately 3.5.1
Back to reference
point before
machining
Yes: Valid; No: Invalid Yes Immediately 3.4.4
Whether to cancel the
mark of backing to the
reference point after
E-stop
Yes: Valid; No: Invalid Yes Immediately 3.4.4
Is reset SVON when
estop
Yes: Valid; No: Invalid No Immediately 3.4.4
Max angle of joining
high speed
0~180.001 deg 120 Immediately 3.6.3
Corner trace
pretreatment options
0:Not disposed;
1:Curve smooth;
3:Arc smooth
0 Immediately 3.6.3
Corner tolerance 0~0.5001 mm 0.1 Immediately 3.6.3
Conner speed look
ahead distance
0~0.05 mm 0 Immediately 3.6.3
Predicted segment
No.
0~100 50 Immediately 3.6.3
Whether to use type S
algorithm
Yes: Use; No: Not use 1 Immediately 3.6.3
Plunge speed option
0: Not disposed;
1: Direct Z motion only;
2: General Z down motion
0 Immediately 3.6.3
Z down speed 0~ Max Z-axis speed 300 Immediately 3.6.3
Z deceleration
distance
0~999 mm 10 Immediately 3.6.3
Z approach speed 0~default feeding speed mm/min 600 Immediately 3.6.3