Specialized Concentrated Focused
Operation
「
67
」
After F4 is pressed, users can edit the current file on the integrated system.
Delete
The shortcut key is F3, only valid under [Program] function section.
Select the file to be deleted, and then press F3 to eject a prompt box, as shown in Fig. 3-56.
Fig. 3-56 Information Prompt Dialog
Pressing the letter Y will delete this program file. (Note: the system will delete this file from the default
system disk. To avoid data loss, if necessary, copy this file to a mobile disk for backup.)
Copy to local
The shortcut key is F5, only valid under [Program] function section.
Pressing F5 will copy the selected file to the mobile disk on the premise that a mobile disk is inserted.
Change to local
The shortcut key is F7.
Pressing F7 will open the program file list in the mobile disk on the premise that a mobile disk is inserted.
New
The shortcut key is F6.
After F6 is pressed, the system will create a new file for compiling a new program.
Related parameters (DXF file)
Parameter
Definition
Setting Range
Tool lifting height
It sets the tool lifting height during rapid traverse.
0~100000 mm
Machining depth
It specifies the processing depth for 2D files.
-100000~0 mm
Use first point as zero
point
It sets whether to set the firstly met coordinate
point as zero point when DXF file is processed.
True: Use the first
point as zero point
False: Not use the
first point as zero
