WEIHONG LS6000M, Manual

Page: 1 / 121

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
.
Manufacturer's Manual of Ncstudio V15 Laser
Cutting (LS6000M) Control System
Version: 2022.01.14 2nd Version
Author: Product Testing Department
Weihong Corporation All Rights Reserved
Contents
1 Quick Start ........................................................................................................................ 1
1.1 Overview .................................................................................................................... 1
1.2 Hardware Connection Diagram .................................................................................. 1
1.3 Shortcut Keys ............................................................................................................. 3
2 Install the System ............................................................................................................. 4
2.1 Overview .................................................................................................................... 4
2.2 Install Follow-up Amplifier .......................................................................................... 4
2.3 Install Motion Control Card ......................................................................................... 4
2.4 Install the Software ..................................................................................................... 4
2.5 Install the Drive........................................................................................................... 5
2.5.1 Automatic Installation ........................................................................................... 5
2.5.2 Manual Installation ............................................................................................... 6
3 System Debugging............................................................................................................ 7
3.1 Overview .................................................................................................................... 7
3.2 Configure Settings in NcConfig .................................................................................. 7
3.2.1 Data Backup ........................................................................................................ 8
3.2.2 Data Restoration .................................................................................................. 8
3.2.3 Device and Port Mapping Configuration .............................................................. 8
3.2.4 Port Protection ..................................................................................................... 9
3.3 Modify I/O Port Polarity ............................................................................................ 10
3.4 Set Drive Parameters ............................................................................................... 10
3.4.1 Set Drive Parameters in Non-bus Control Systems ........................................... 11
3.4.2 Set Drive Parameters in Bus Control Systems .................................................. 29
3.5 Set Bus System Parameters .................................................................................... 32
3.6 Set Speed Parameters ............................................................................................. 32
3.7 Set Pulse Equivalent ................................................................................................ 33
3.8 Check Axis Direction ................................................................................................ 34
3.9 Set Workbench Travel Limits ................................................................................... 34
3.10 Set the Screw Error Compensation ........................................................................ 34
3.10.1 Set the Backlash Compensation ...................................................................... 35
3.10.2 Set the Bidirectional Compensation ................................................................. 35