WEIHONG LS6000M, Manual

Page: 54 / 121

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
.
51 / 116

Follow Height
o
Description: Indicates the distance between the cutter and material plate
during follow control.
o
Range: 0 mm
–30 mm
o
Value: 1

Z UP Pos.
o
Description: Indicates the mechanical coordinate you want the Z axis to stop
at after the Z axis go to the mechanical origin and the follow/machining is
complete.
o
Range: -100 mm
–100 mm
o
Value: -10

Safe Lift Height
o
Description: Indicates the safe lift height of the Z axis when it is not at the
mechanical origin.
o
Range: 0 mm
–100 mm
o
Value: 40

Follow Max.H.
o
Description: Indicates the maximum direct follow height.
o
Range: 0.01 mm
–16 mm
o
Value: 5
4.3.3 Follow-up
Includes the following parameters:

Positioning Gain
o
Description: Used to control the sensitivity of positioning movement during
follow
o
Range: 1
–20
o
Value: 8

Follow-up Gain
o
Description: Used to control the follow sensitivity.
o
Range: 1
–5
o
Value: 1

Follow-up feed forward
o
Description: During a certain range, the larger this value, the quicker the
response. If this value is too larger, jitters will be created during follow.
o
Range: 0
–100
o
Value: 50

INposition Tolerance
o
Description: When the system detects that the current height = follow height
± in position tolerance , the system thinks that the cutter has moved to the
follow position.
o
Range: 0 mm
–655 mm
o
Value: 0.3

Vibration Suppression Level
o
Description: The larger this value, the stronger the suppression of the
material vibration during machining and the lower the follow sensitivity.
o
Range: 0
–5
o
Value: 1

Servo Compensation Parameter