WEG CFW300 V1.3X, Programming Manual

Page: 12 / 157

0
Quick Reference of Parameters, Alarms and Faults
0-4 | CFW300
Param. Description Adjustable Range Factory Setting Prop. Page
P220
LOC/REM Selection Source 0 = Always Local
1 = Always Remote
2 and 3 = Not Used
4 = DIx
5 = Serial/USB (LOC)
6 = Serial/USB (REM)
7 and 8 = Not Used
9 = CO/DN/DP (LOC)
10 = CO/DN/DP (REM)
11 = SoftPLC 0 cfg 7-4
P221 LOC Reference Sel. 0 = HMI Keys
1 = AI1
2 = AI2
3 = Not Used
4 = FI
5 = AI1 + AI2 > 0
6 = AI1 + AI2
7 = E.P.
8 = Multispeed
9 = Serial/USB
10 = Not Used
11 = CO/DN/DP
12 = SoftPLC
13 = Not Used
14 = AI1 > 0
15 = AI2 > 0
16 = Not Used
17 = FI > 0 0 cfg 7-4
P222 REM Reference Sel. See Options in P221 1 cfg 7-4
P223 LOC FWD/REV Sel. 0 = Forward
1 = Reverse
2 and 3 = Not Used
4 = DIx
5 = Serial/USB (FWD)
6 = Serial/USB (REV)
7 and 8 = Not Used
9 = CO/DN/DP (FWD)
10 = CO/DN/DP (REV)
11 = Not Used
12 = SoftPLC 0 cfg 7-5
P224 LOC Run/Stop Sel. 0 = HMI Keys
1 = DIx
2 = Serial/USB
3 = Not Used
4 = CO/DN/DP
5 = SoftPLC 0 cfg 7-5
P225
LOC JOG Selection 0 = Disabled
1 = Not Used
2 = DIx
3 = Serial/USB
4 = Not Used
5 = CO/DN/DP
6 = SoftPLC 1 cfg 7-6
P226 REM FWD/REV Selection See Options in P223 4 cfg 7-5
P227 REM Run/Stop Selection See Options in P224 1 cfg 7-5
P228 REM JOG Selection See Options in P225 2 cfg 7-6
P229
Stop Mode Selection 0 = Ramp to Stop
1 = Coast to Stop 0 cfg 7-13
P230 Dead Zone (AIs and FI) 0 = Inactive
1 = Active 0 cfg 12-1